South East Landbased
Training Courses LLP

Safe Application of Pesticides Using Hand-Held Pesticide Injection Equipment – PA6INJ

Duration:
1/2 Day

Safe Application of Pesticides Using Hand-Held Pesticide Injection Equipment – PA6INJ Training Course

Half Day PA6 Injection training to prepare candidate for City & Guilds NPTC practical assessment. PA6INJ is especially suitable for the treatment of Japanese Knotweed; a problematic and invasive species whereby its roots can penetrate walls, foundations, footpaths, roads etc and has potential to cause significant

COURSE CONTENT

  • Legislative and safety regulation relating to pesticide injection equipment
  • Assess environmental factors relating to the site
  • Complete an environmental risk assessment
  • Read and interpret product information
  • Prepare and calibrate the pesticide injection equipment
  • Inject pesticides
  • Post operational procedures

BY THE END OF THE COURSE, YOU’LL BE ABLE TO

  • Use pesticides safely, applied with appropriate application equipment
  • Identify and select nozzles and carry out machine calibration
  • Operate equipment within legislation and codes of practice
  • Clean equipment and dispose of unwanted pesticides and containers
  • Identify and rectify faults and recognise when spraying is inadvisable

EQUIPMENT REQUIRED

Protective Equipment:

All candidates must have personal protective equipment which must display a CE mark, consisting of:

  • Disposable Coveralls: can be a single piece suit or combination of garments, with or without hood, which covers the entire body protection Type: 5/6 particle & limited splash EN 13982 5/6
  • Face shield Splash rated EN 166
  • Nitrile gloves300mm long & minimum 0.5mm thickness EN 374
  • Wellington or water-repellent boots with a good grip (preferably with steel toe cap protection) EN 20345
  • Please bring a calculator (not a mobile phone)

PRE-REQUISITES: Candidates over 16 years, Achieved Foundation Unit PA1 and be able to interpret information on product label

FURTHER INFORMATION: https://www.nptc.org.uk/

All of our courses can be accredited by either NPTC or LANTRA, depending on the level of accreditation you require

PROGRESSION COURSE SUGGESTIONS:

  • Ground Crop Sprayer – mounted or trailed (PA2A)
  • Broadcast Air Assisted Sprayer – mounted or trailed (PA3)
  • Granule Applicator (PA4G)
  • Slug Pellets (PA4S)
  • Hand-held Applicator - knapsack (PA6A)
  • Hand-held Applicator – knapsack in or near water (PA6AW)
  • Hand-held Pesticide Plugs Equipment (PA6PP)

You may also be interested in...

Aerial Pruning

AP
Individuals who use chainsaws as part of their work in arboriculture, forestry or other industries. The Aerial Pruning Course will provide the individual with the...

Professional Tree Inspection Refresher

Screenshot-2025-02-17-164139
This one-day Refresher course is intended for those who have previously attended the three-day Professional Tree Inspection course; to update you on knowledge and skills.

Dealing with Interwoven Stems and Part Blown Trees

Windblown
Individuals who operate and carry out tasks in dealing with interwoven stems and part blown trees as part of their work in arboriculture, forestry, or...

Assisted Felling

use-of-winch
Individuals who use chainsaws as part of their work in arboriculture, forestry or other industries. It will provide the individual with the knowledge, understanding and...

Forest Machine Operations

FMO-website
Forest Machine Operators (FMOs) undertake a range of tasks to do with the harvesting and maintenance of trees in natural forests and estates, including logging,...

Remote-Control Machinery

IMG_5029
This would appeal to you if you use Remote-Control Mowers, Stump Grinders or Winches as part of your work.
Course Enquiry
Full Name(Required)